Perkins 904 Series
904J-E36TA
Industrial Open Power Unit
Available from FBM Trading, an authorized Perkins® engine dealer.
Overview
904J-E36TA industrial power
The Perkins 904J-E36TA is an industrial open power unit for equipment applications that require dependable, application-ready power. It delivers up to 134 hp / 100 kW with maximum torque of 406 lb-ft @ 1500 rpm / 550 Nm @ 1500 rpm. Its listed emissions configuration is EU Stage V/U.S. EPA Tier 4 Final/ Japan 2014 (Tier 4 Final).
Features at a glance
Designed for industrial applications
Low cost machine installation
Designed to support practical integration across a wide range of industrial equipment.
Industry leading flexibility
A Perkins-engineered capability developed for industrial equipment and operating requirements.
Lifetime of low cost
Engineered to balance productive performance with efficient day-to-day operation.
Standard equipment
904J-E36TA standard equipment
Aftertreatment Equipment
- Aftertreatment mounted on engine as standard
- Range of DEF tanks and DEF lines available
Air System
- Standard and heavy duty air cleaners
Cooling System
- 50:50 water glycol mix
- Detailed guidance on cooling system design and validation available to ensure machine reliability
- Engine mounted radiator with top tank temperature of 108°C (226°F)
- Pusher or puller fan options
- Radiator erosion screen is available
Electrical and Electronics
- 12V and 24V systems
- Data interface via CANbus J1939
- Instrument control panel available
- Full electronic control
- Glow plugs for best cold starting with minimum battery impact
- High power alternator and starter motor options
- Sensors and robust wiring harness included
Flywheel and Flywheel Housing
- SAE3 flywheel housing and flywheel with pilot bore
- Wide choice of interfaces for common transmissions and hydraulic pumps
Fuel System
- Electronic high pressure common rail
- Fuel filter - IOPU mounted
- Standard and heavy duty fuel filtration
- Water sensor included - early warning for operator
General
- Cold-start capable with standard equipment to -25°C
- Supplied painted or lacquered
Oil System
- Oil filters - mounting options available on either side of the engine, plus remote
- Dipsticks - choice of position and length
- High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes
Power Take-Off (PTO)
- SAE-A and SAE-B interfaces available
For complete, current manufacturer information, view this model on Perkins.com .